Scalix mit Debian Etch: Unterschied zwischen den Versionen
Zur Navigation springen
Zur Suche springen
Keine Bearbeitungszusammenfassung |
|||
| Zeile 1.568: | Zeile 1.568: | ||
== Scalix Installation == | == Scalix Installation == | ||
Installieren === | |||
<pre> | <pre> | ||
cd /usr/src/scalix-debian-11.0.4-GA/software/scalix-server | cd /usr/src/scalix-debian-11.0.4-GA/software/scalix-server | ||
| Zeile 1.767: | Zeile 1.761: | ||
Jetzt sollte man sich in o.g. URL als sxadmin und dem vorher definierten Password einloggen können. | Jetzt sollte man sich in o.g. URL als sxadmin und dem vorher definierten Password einloggen können. | ||
Als sxadmin kann man in der AdminConsole (SAC) neue User anlegen. | Als sxadmin kann man in der AdminConsole (SAC) neue User anlegen. | ||
== Quellen == | == Quellen == | ||
Version vom 18. Mai 2007, 20:32 Uhr
Vorbereitung
Etch Installation in XEN DomU
Ich starte mit der Installation auf einer frischen Etch-Installation unter XEN. Der Einfachheit halber benutze ich die xen-tools.
apt-get install xen-tools vi /etc/xen-tools/xen-tools.conf # # ... lvm = vg debootstrap = 1 # ## # Disk and Sizing options. ## # size = 4Gb # Disk image size. memory = 128Mb # Memory size swap = 128Mb # Swap size # noswap = 1 # Don't use swap at all for the new system. fs = ext3 # use the EXT3 filesystem for the disk image. dist = etch # Default distribution to install. image = sparse # Specify sparse vs. full disk images. dhcp = 1 # # Default kernel and ramdisk to use for the virtual servers # kernel = /boot/vmlinuz-2.6.18-4-xen-686 initrd = /boot/initrd.img-2.6.18-4-xen-686 # # The default mirror for debootstrap which can be used to install # Debian Sid, Sarge, and Etch. # mirror = http://ftp.de.debian.org/debian/ # ...
Etch-DomU Image erstellen und anschliessend starten
xen-create-image --hostname=scx vi /etc/xen/scx.cfg xm create -c /etc/xen/scx.cfg ... ethtool -K eth0 tx off vi /etc/network/interfaces # uncomment ethtool # post-up ethtool -K eth0 tx off
Zusätzliche Pakete installieren
Jetzt die notwendigen Pakete installieren:
- Apache, Sendmail
- Postgres
- Kerberos
- SASL2
- diverse Libraries
- Sun Java
- gawk, wget, elinks, ethtool, less, host
apt-get install -u apache2 sendmail sendmail-doc apt-get install -u postgresql apt-get install -u krb5-config krb5-doc krb5-user libkadm55 libkrb53 apt-get install -u saslauthd libsasl2-modules libsasl2-gssapi-mit sasl2-bin libssl0.9.7 apt-get install -u libxml2 libglib2.0-0 libstdc++2.10-glibc2.2 libstdc++5 apt-get install -u sun-java5-jre apt-get install -u gawk elinks wget w3m less ethtool host
Folgendes habe ich angepasst (siehe unten):
- Sendmail-Dual Konfiguration
- Smarthost
- Masquerading
- Amavisd-new integrieren
Ich fange mit Amavisd-new, Spamassassin und Clamav an.
Sendmail mit Amavisd-New konfigurieren
Nach der Installation muss Amavis die zentrale Spamassassin-Konfigurationsdatei etc/spamassassin/local.cf untergeschoben werden und dem Benutzer clamav die Gruppe amavis zugeordnet werden:
apt-get install -u amavisd-new clamav clamav-daemon spamassassin adduser clamav amavis mkdir ~amavis/.spamassassin ln -s /etc/spamassassin/local.cf \ ~amavis/.spamassassin/user_prefs
Die Amavisd Konfiguration wird angepasst, unter /etc/amavis/conf.d/50-user:
use strict; # # Place your configuration directives here. They will override those in # earlier files. # # See /usr/share/doc/amavisd-new/ for documentation and examples of # the directives you can use in this file # @bypass_virus_checks_maps = ( \%bypass_virus_checks, \@bypass_virus_checks_acl, \$bypass_virus_checks_re); @bypass_spam_checks_maps = ( \%bypass_spam_checks, \@bypass_spam_checks_acl, \$bypass_spam_checks_re); $final_virus_destiny = D_DISCARD; # (data not lost, see virus quarantine) $final_banned_destiny = D_DISCARD; # D_REJECT when front-end MTA $final_spam_destiny = D_DISCARD; $final_bad_header_destiny = D_PASS; # False-positive prone (for spam) #------------ Do not modify anything below this line ------------- 1; # insure a defined return
Amavisd Neustart:
/etc/init.d/amavis restart
Sendmail-Dual-Konfiguration
Um Amavisd-New mit Spamassassin und Clamav in sendmail zu integrieren verwende ich das Sendmail-Dual Setup (welches der Konfiguration von Exim mit Amavisd-new entspricht).
Auszug aus /usr/share/doc/amavisd-new/README.sendmail-dual.gz:
The following setup is described in this document:
............................ ............................
: sendmail instance MTA-RX : : sendmail instance MTA-TX :
: : : :
25 -----> \ (mqueue-rx) : : (mqueue) / -------> forward
587 -----> > -queue- : : -queue- ->-----+ :
^ : / | MAIL_HUB, : : | \ -------> local
| : v SMART_HOST : : ^ : delivery
msp ...........|................ ....|.......................
| ^ loopback interface
v | port 10025
loopback interf.| port 10024 |
.....|.......................|.............
: $inet_socket_port=10024 | :
: | :
: $forward_method='smtp:127.0.0.1:10025' :
: $notify_method ='smtp:127.0.0.1:10025' :
: :
: amavisd-new :
...........................................
Die Sendmail Konfiguration ist unter /etc/mail/sendmail-rx.mc und /etc/mail/sendmail-tx.mc definiert.
Sendmail-RX
/etc/mail/sendmail-rx.mc
include(`/usr/share/sendmail/cf/m4/cf.m4')dnl VERSIONID(`$Id: sendmail-rx.mc, v 8.13.8-3 2006-12-08 20:21:10 neobiker Exp $') OSTYPE(`debian')dnl DOMAIN(`debian-mta')dnl dnl # dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE undefine(`confHOST_STATUS_DIRECTORY')dnl #DAEMON_HOSTSTATS= dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE dnl # define(`confRUN_AS_USER',`smmta:smmsp')dnl DAEMON_OPTIONS(`Family=inet, Name=MTA-RX, Port=smtp, Addr=127.0.0.1')dnl FEATURE(`access_db', , `skip')dnl FEATURE(`authinfo', `hash /etc/mail/auth/client-info')dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # include(`/etc/mail/sasl/sasl.m4')dnl include(`/etc/mail/tls/starttls.m4')dnl dnl # define(`confPID_FILE', `/var/run/sendmail/mta/sendmail-rx.pid')dnl Non-default pid file define(`STATUS_FILE', `/etc/mail/stat-rx')dnl Non-default stat file define(`QUEUE_DIR', `/var/spool/mqueue-rx')dnl Non-default queue area define(`confQUEUE_SORT_ORDER',`Modification')dnl Modif or Random are reasonable dnl # dnl Match the number of queue runners (R=) to the number of amavisd-new child dnl processes ($max_servers). 2 to 7 OK, 10 is plenty, 20 is too many QUEUE_GROUP(`mqueue', `P=/var/spool/mqueue-rx, R=2, F=f')dnl dnl # FEATURE(stickyhost)dnl define(`MAIL_HUB', `esmtp:[127.0.0.1]')dnl Forward all local mail to amavisd define(`SMART_HOST', `esmtp:[127.0.0.1]')dnl Forward all other mail to amavisd define(`LOCAL_RELAY',`esmtp:[127.0.0.1]')dnl define(`confDELIVERY_MODE',`q')dnl Delivery mode: queue only (a must, define(`ESMTP_MAILER_ARGS',`TCP $h 10024')dnl To tcp port 10024 instead of 25 MODIFY_MAILER_FLAGS(`ESMTP', `+z')dnl Speak LMTP (this is optional) define(`SMTP_MAILER_MAXMSGS',`10')dnl Max no. of msgs in a single connection define(`confTO_DATAFINAL',`20m')dnl 20 minute timeout for content checking dnl # undefine(`ALIAS_FILE')dnl No aliases file, all local mail goes to MAIL_HUB define(`confFORWARD_PATH')dnl Empty search path for .forward files undefine(`UUCP_RELAY')dnl undefine(`BITNET_RELAY')dnl undefine(`DECNET_RELAY')dnl MAILER(`smtp')dnl
Sendmail-TX
/etc/mail/sendmail-tx.mc
define(`_USE_ETC_MAIL_')dnl include(`/usr/share/sendmail/cf/m4/cf.m4')dnl VERSIONID(`$Id: sendmail-tx.mc, v 8.13.8-3 2006-12-08 20:21:10 neobiker Exp $') OSTYPE(`debian')dnl DOMAIN(`debian-mta')dnl dnl # dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE undefine(`confHOST_STATUS_DIRECTORY')dnl #DAEMON_HOSTSTATS= dnl # Items controlled by /etc/mail/sendmail.conf - DO NOT TOUCH HERE dnl # FEATURE(`no_default_msa')dnl FEATURE(`access_db', , `skip')dnl DAEMON_OPTIONS(`Family=inet, Name=MTA-TX, Port=10025, Addr=127.0.0.1')dnl dnl # include(`/etc/mail/sasl/sasl.m4')dnl include(`/etc/mail/tls/starttls.m4')dnl dnl # include(`/etc/mail/m4/dialup.m4')dnl include(`/etc/mail/m4/provider.m4')dnl dnl # dnl # Masquerading options FEATURE(`always_add_domain')dnl MASQUERADE_AS(`scx.neobiker.de')dnl FEATURE(`allmasquerade')dnl FEATURE(`masquerade_envelope')dnl dnl # define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl FEATURE(`authinfo', `hash /etc/mail/auth/client-info')dnl define(`confREFUSE_LA',999)dnl Disable the feature, limiting belongs to MTA-RX define(`confMAX_DAEMON_CHILDREN',0)dnl Disable, limiting belongs to MTA-RX FEATURE(`nocanonify')dnl Host/domain names are considered canonical define(`confSMTP_LOGIN_MSG', `$w.tx.$m Sendmail $v/$Z; $b')dnl define(`confTO_IDENT', `0')dnl Disable IDENT dnl # dnl # Default Mailer setup MAILER_DEFINITIONS MAILER(scalix)dnl MAILER(`local')dnl MAILER(`smtp')dnl
Sendmail-Smarthost
Der Smarthost wird unter /etc/mail/m4/provider.m4 eintragen (und von dort importiert):
define(`SMART_HOST', `mail.1und1.de')
Sendmail konfigurieren und starten
cp -p /var/spool/mqueue /var/spool/mqueue-rx m4 /etc/mail/hostname-rx.mc > /etc/mail/sendmail-rx.cf m4 /etc/mail/hostname-tx.mc > /etc/mail/sendmail-tx.cf /usr/sbin/sendmail -C /etc/mail/sendmail-rx.cf -L sm-mta-rx -bd -qp /usr/sbin/sendmail -C /etc/mail/sendmail-tx.cf -L sm-mta-tx -bd -q15m /usr/sbin/sendmail -Ac -L sm-msp-queue -q10m
Sendmail-Dual Initscript
Ich habe das normale Sendmail-Initscript angepasst, damit der 2.te Sendmail-Prozess (MTA-RX zus. zu MTA-TX) berücksichtigt wird. Die Anpassungen sind im wesentlichen aus den normalen Prozeduren kopiert und angepasst. Im Original werden die Variablen MTAL_XXXX verwendet, ich habe für den zusätzlichen MTA-RX Prozess diese einfach als MTAR_XXXX wo nötig ergänzt und eingefügt.
Starten wie üblich, zum Debuggen den tail Befehl verwenden, monitoring mit ps:
# tail -f /var/log/mail.info & # /etc/init.d/sendmail-dual start # ps aux|grep -v grep|grep sendmail root 5885 0.0 1.5 8344 2604 ? Ss 19:11 0:00 sendmail: MTA: accepting connections smmta 5886 0.0 1.0 8336 1764 ? S 19:11 0:00 sendmail: MTA: running queue: /var/spool/mqueue-rx root 5890 0.0 1.5 8332 2612 ? Ss 19:11 0:00 sendmail: MTA: accepting connections #
/etc/init.d/sendmail-dual (Ich habe das normale /etc/init.d/sendmail File ersetzt).
#!/bin/sh -e
#
# $Sendmail: init.d,v 8.13.8 2006-12-08 20:21:10 cowboy Exp $
#
# Sendmail rc script for Debian (/etc/init.d/sendmail)
# all the work is done by the imbedded copy of /usr/share/sendmail/sendmail
#
# Copyright (c) 2001-2005, Richard Nelson <cowboy@debian.org>.
#
# Notes (to all):
# * *** Do not edit this file *** Instead edit /etc/mail/sendmail.conf
#
# Notes (to self):
# *
#
set -e;
# set -x;
PATH=/bin:/usr/bin:/sbin:/usr/sbin;
#!/bin/sh -e
#-----------------------------------------------------------------------------
# $Sendmail: sm_helper.sh,v 8.13.8 2006-12-08 20:21:10 cowboy Exp $
#
# Copyright (c) 1998-2005 Richard Nelson. All Rights Reserved.
#
# Debian helper function script for Debian Sendmail
# Note: this file supports 8.7.6 - 9.0.0
#
# Notes (to all):
# *
#
# Notes (to self):
# * clean_queues fubar, esp wrt MSP
#
#-----------------------------------------------------------------------------
#
set -e;
DEBUG=0;
# LSB compliance (kinda)
if [ -f /lib/lsb/init-functions ]; then
. /lib/lsb/init-functions;
else
log_begin_msg() { echo "$@"; };
log_success_msg() { echo "$@"; };
log_warning_msg() { echo "$@"; };
fi;
#------------------------------------------------------------------------------
# Parameters for the sendmail daemon
# Do *NOT* touch these lines, instead, edit /etc/mail/sendmail.conf
# The _PARMS lines are listed in precedence order
#------------------------------------------------------------------------------
Get_Parameters () {
# Main configuration parameters in /etc/mail/sendmail.conf
DAEMON_MODE='Daemon';
DAEMON_PARMS='';
DAEMON_UID='root';
QUEUE_MODE="$DAEMON_MODE";
QUEUE_INTERVAL='10m';
QUEUE_PARMS='';
MSP_MODE="$QUEUE_MODE";
MSP_INTERVAL="$QUEUE_INTERVAL";
MSP_PARMS="";
MISC_PARMS='';
CRON_PARMS='';
LOG_CMDS='No';
# Secondary (non-documented) parameters in /etc/mail/sendmail.conf
# Caveat Emptor: change these at your own risk - they impact several
# disjoint pieces parts...
SENDMAIL_ROOT='/var/run/sendmail';
MTA_DAEMON='/usr/sbin/sendmail-mta';
MTA_COMMAND='/usr/sbin/sendmail-mta';
MTA_A='-Am';
MTAR_L='-L sm-mta-rx';
MTAL_L='-L sm-mta-tx';
MTAL_L_QUEUE='-L sm-mta-queue';
MTAL_L_RUNQ='-L sm-mta-runq';
MTA_ROOT="${SENDMAIL_ROOT}/mta";
MTAR_PIDFILE="${MTA_ROOT}/sendmail-rx.pid";
MTAL_PIDFILE="${MTA_ROOT}/sendmail.pid";
MTAL_SOCKET="${MTA_ROOT}/smsocket";
MTAL_CNTL="${MTA_ROOT}/smcontrol";
MTAQ_L='-L sm-que';
MTAQ_L_RUNQ='-L sm-que-runq';
MTAQ_PIDFILE="${MTA_ROOT}/queue.pid";
MTAQ_SOCKET="${MTA_ROOT}/qusocket";
MTAQ_CNTL="${MTA_ROOT}/qucontrol";
MSP_DAEMON='/usr/sbin/sendmail-msp';
MSP_COMMAND='/usr/sbin/sendmail-msp';
MSP_A='-Ac';
MSP_L='-L sm-msp';
MSP_L_QUEUE='-L sm-msp-queue';
MSP_ROOT="${SENDMAIL_ROOT}/msp";
MSP_PIDFILE="${MSP_ROOT}/sendmail.pid";
MSP_SOCKET="${MSP_ROOT}/smsocket";
MSP_CNTL="${MSP_ROOT}/smcontrol";
# Pull in any user modified variables
if [ -f /etc/mail/sendmail.conf ]; then
. /etc/mail/sendmail.conf;
fi;
# These can't be user customized
SM_Get_Parameters='yes';
PATH='/bin:/usr/bin:/sbin:/usr/sbin';
STAMP_DIR="${SENDMAIL_ROOT}/stampdir";
START_MTAR_CMD="start-stop-daemon \
--pidfile $MTAR_PIDFILE \
--exec $MTA_DAEMON \
--startas $MTA_COMMAND \
--start";
STOP_MTAR_CMD="start-stop-daemon \
--pidfile $MTAR_PIDFILE \
--name sendmail-mta \
--stop";
SIGNAL_MTAR_CMD="start-stop-daemon \
--pidfile $MTAR_PIDFILE \
--name sendmail-mta \
--stop";
START_MTAL_CMD="start-stop-daemon \
--pidfile $MTAL_PIDFILE \
--exec $MTA_DAEMON \
--startas $MTA_COMMAND \
--start";
STOP_MTAL_CMD="start-stop-daemon \
--pidfile $MTAL_PIDFILE \
--name sendmail-mta \
--stop";
SIGNAL_MTAL_CMD="start-stop-daemon \
--pidfile $MTAL_PIDFILE \
--name sendmail-mta \
--stop";
START_MTAQ_CMD="start-stop-daemon \
--pidfile $MTAQ_PIDFILE \
--make-pidfile \
--exec $MTA_DAEMON \
--startas $MTA_COMMAND \
--start";
STOP_MTAQ_CMD="start-stop-daemon \
--pidfile $MTAQ_PIDFILE \
--name sendmail-mta \
--stop";
SIGNAL_MTAQ_CMD="start-stop-daemon \
--pidfile $MTAQ_PIDFILE \
--name sendmail-mta \
--stop";
START_MSP_CMD="start-stop-daemon \
--pidfile $MSP_PIDFILE \
--exec $MSP_DAEMON \
--startas $MSP_COMMAND \
--chuid smmsp \
--start";
STOP_MSP_CMD="start-stop-daemon \
--pidfile $MSP_PIDFILE \
--name sendmail-msp \
--stop";
SIGNAL_MSP_CMD="start-stop-daemon \
--pidfile $MSP_PIDFILE \
--name sendmail-msp \
--stop";
NAME='sendmail';
FLAGS='defaults 50';
# Sanitize some keyword entries
DAEMON_MODE=$(echo "$DAEMON_MODE" | tr '[:upper:]' '[:lower:]');
QUEUE_MODE=$(echo "$QUEUE_MODE" | tr '[:upper:]' '[:lower:]');
MSP_MODE=$(echo "$MSP_MODE" | tr '[:upper:]' '[:lower:]');
# See if we can share the listener and queue-runner daemon:
# * Both must be in daemon mode
# * They must have the same (possibly empty) parameters
if [ "$DAEMON_MODE" = "daemon" \
-a \( \( "$QUEUE_MODE" = "cron" -o "$QUEUE_MODE" = "none" \) \
-o \( "$QUEUE_MODE" != "cron" \
-a "$QUEUE_MODE" != "none" \
-a "$DAEMON_PARMS" = "$QUEUE_PARMS" \
\) \
\) ]; then
SPLIT_DAEMON=0;
else
SPLIT_DAEMON=1;
fi;
# Version dependant support:
# 8.12.0+ M{TA,MSP}_A
if [ ! -f /usr/share/sendmail/cf/feature/msp.m4 ]; then
MTA_A='';
MTAL_L='';
MTAL_L_QUEUE='';
MSP_A='';
MSP_L='';
MSP_L_QUEUE='';
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# enhanced sendmail startup
#------------------------------------------------------------------------------
start_mta () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# If already running, don't start it...
if is_running mta; then
log_warning_msg 'MTA is already running.';
return;
fi;
#
# Check if we're going to run a daemon (and how many):
daemon_check;
#
# Mark restarted for communication betwixt here and /etc/mail/Makefile
touch $STAMP_DIR/reload;
#
if [ "$DAEMON_MODE" = "daemon" ]; then
#
# Allow Unix (local) connections betwixt MSP/MTA:
touch $MTAL_SOCKET;
#
# We can only afford to clean the MTA queues if running daemon mode,
# otherwise, there is a chance that a cronjob might still be using
# the queue... Thats also why we don't clean the MSP queues herein.
#clean_queues;
#
# cd to a safe place to stash core files...
cd $MTA_ROOT;
#
# if running in -dual config, run the receive daemon
CMD="$START_MTAR_CMD -- $MTAR_PARMS";
if [ "$LOG_CMDS" = "Yes" ]; then
logger -i -p mail.debug -- "$0 $CMD";
fi;
$CMD &
CMD="$START_MTAL_CMD -- $MTAL_PARMS";
if [ "$LOG_CMDS" = "Yes" ]; then
logger -i -p mail.debug -- "$0 $CMD";
fi;
$CMD &
#
# Update permissions on smsocket
sleep 2;
chown $DAEMON_UID:smmsp $MTAL_SOCKET;
chmod 0666 $MTAL_SOCKET;
fi;
#
# Check for split daemon mode (separate listener/queue runner)
if [ "$SPLIT_DAEMON" -eq 1 ]; then
CMD="$START_MTAQ_CMD -- $MTAQ_PARMS";
if [ "$LOG_CMDS" = "Yes" ]; then
logger -i -p mail.debug -- "$0 $CMD";
fi;
$CMD &
sleep 2;
qp=`expr "${MTAQ_PARMS}" : '.*\(-qp[0-9]*[smhdw]\)'` || true;
if [ -z "$qp" ]; then
chmod 0664 $MTAQ_PIDFILE;
else
qc=`ps --no-headers -fCsendmail \
| egrep -e 'Queue control' \
| awk '{print $2}'`;
if [ -z "$qc" ]; then
rm -f $MTAQ_PIDFILE;
else
chmod 0664 $MTAQ_PIDFILE;
printf "$qc\n$MTA_COMMAND $MTAQ_PARMS" > $MTAQ_PIDFILE;
fi;
fi;
fi;
#
# if running split service, run the client queues (just to make sure)
if check_msp; then
$MSP_COMMAND -q $MSP_A $MSP_L_QUEUE $MSP_PARMS $MISC_PARMS;
fi;
};
start_msp () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# If already running, don't start it...
if is_running msp; then
log_warning_msg 'MSP is already running.';
return;
fi;
#
# Check to see if MSP mode is indeed available
if ! check_msp; then
return;
fi;
#
# Check if we're going to run a daemon:
if [ "$MSP_MODE" != 'daemon' ]; then
return;
fi;
#
# We can only afford to clean the MSP queues if running daemon mode,
# otherwise, there is a chance that a cronjob might still be using
# the queue... Thats also why we don't clean the MTA queues herein.
#clean_queues /var/spool/mqueue-client;
#
# cd to a safe place to stash core files...
cd $MSP_ROOT;
$START_MSP_CMD -- \
$MSP_A $MSP_L -q${MSP_INTERVAL} $MSP_PARMS $MISC_PARMS &
};
start_sendmail () {
start_mta;
if check_msp; then
start_msp;
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# enhanced sendmail reload
#------------------------------------------------------------------------------
reload_mta () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# reload (signal -HUP) is *much* better/faster than stop/start
#
# Mark restarted for communication betwixt here and /etc/mail/Makefile
touch $STAMP_DIR/reload;
#
# If not running, just start it...
if ! is_running mta; then
start_mta;
fi;
#
# Is running, must signal it...
$SIGNAL_MTAL_CMD --signal HUP --oknodo --quiet || true;
sleep 2;
chown $DAEMON_UID:smmta $MTAL_SOCKET;
chmod 0666 $MTAL_SOCKET;
$SIGNAL_MTAR_CMD --signal HUP --oknodo --quiet || true;
#
# Check for split daemon mode (separate listener/queue runner)
if [ "$SPLIT_DAEMON" -eq 1 ]; then
$SIGNAL_MTAQ_CMD --signal HUP --oknodo --quiet || true;
fi;
};
reload_msp () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# reload (signal -HUP) is *much* better/faster than stop/start
#
# If not running, just start it...
if ! is_running msp; then
start_msp;
fi;
#
# Is running, must signal it...
$SIGNAL_MSP_CMD --signal HUP --oknodo --quiet || true;
};
reload_sendmail () {
reload_mta;
if check_msp; then
reload_msp;
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# enhanced sendmail shutdown
#------------------------------------------------------------------------------
stop_mta () {
local cnt;
stopped=0;
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# If not running, don't stop it...
#if ! is_running mta; then
# return;
# fi;
#
# Is running, must stop it...
$STOP_MTAR_CMD --signal TERM --quiet --oknodo > /dev/null;
$STOP_MTAL_CMD --signal TERM --quiet --oknodo > /dev/null;
#
# Now we have to wait until sendmail has _really_ stopped.
#
sleep 2;
if $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; then
echo -n ' Waiting .';
cnt=0;
while $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; do
cnt=`expr $cnt + 1`;
if [ $cnt -gt 60 ]; then
#
# Waited 120 seconds now. Fail.
#
echo -n ' Failed ';
stopped=1;
break;
fi;
sleep 2;
echo -n '.';
done;
echo -n ' Done ';
fi;
# Remove pidfile if stopped
if ! $STOP_MTAL_CMD --signal TERM --quiet > /dev/null; then
rm -f "$MTAL_PIDFILE";
fi
#
# Now we have to wait until sendmail has _really_ stopped.
#
if $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; then
echo -n ' Waiting .';
cnt=0;
while $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; do
cnt=`expr $cnt + 1`;
if [ $cnt -gt 60 ]; then
#
# Waited 120 seconds now. Fail.
#
echo -n ' Failed ';
stopped=1;
break;
fi;
sleep 2;
echo -n '.';
done;
echo -n ' Done ';
fi;
# Remove pidfile if stopped
if ! $STOP_MTAR_CMD --signal TERM --quiet > /dev/null; then
rm -f "$MTAR_PIDFILE";
fi
};
stop_queue () {
local cnt;
stopped=0;
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# If not running, don't stop it...
if ! is_running queue; then
return;
fi;
#
# Is running, must stop it...
$STOP_MTAQ_CMD --signal TERM --quiet --oknodo > /dev/null;
#
# Now we have to wait until sendmail has _really_ stopped.
#
sleep 2;
if $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; then
echo -n ' Waiting .';
cnt=0;
while $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; do
cnt=`expr $cnt + 1`;
if [ $cnt -gt 60 ]; then
#
# Waited 120 seconds now. Fail.
#
echo -n ' Failed ';
stopped=1;
break;
fi;
sleep 2;
echo -n '.';
done;
echo -n ' Done ';
fi;
# Remove pidfile iff stopped
if ! $STOP_MTAQ_CMD --signal TERM --quiet > /dev/null; then
rm -f "$MTAQ_PIDFILE";
fi
};
stop_msp () {
local cnt;
stopped=0;
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# If not running, don't stop it...
if ! is_running msp; then
return;
fi;
#
# Is running, must stop it...
$STOP_MSP_CMD --signal TERM --quiet --oknodo > /dev/null;
#
# Now we have to wait until sendmail has _really_ stopped.
#
sleep 2;
if $STOP_MSP_CMD --signal TERM --quiet > /dev/null; then
echo -n 'Waiting .';
cnt=0;
while $STOP_MSP_CMD --signal TERM --quiet > /dev/null; do
cnt=`expr $cnt + 1`;
if [ $cnt -gt 60 ]; then
#
# Waited 120 seconds now. Fail.
#
echo -n ' Failed ';
stopped=1;
break;
fi;
sleep 2;
echo -n '.';
done;
echo -n ' Done ';
fi;
# Remove pidfile iff stopped
if ! $STOP_MSP_CMD --signal TERM --quiet > /dev/null; then
rm -f "$MSP_PIDFILE";
fi;
};
stop_sendmail () {
if check_msp; then
stop_msp;
fi;
stop_mta;
stop_queue;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Check to see if sendmail is running
#------------------------------------------------------------------------------
is_running () {
local result;
result=1;
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# Determine proper pidfile to check
who=$(echo "$1" | tr '[:upper:]' '[:lower:]');
case $who in
mta)
PIDFILE="$MTAL_PIDFILE";
PIDFILE2="$MTAR_PIDFILE";
;;
queue)
PIDFILE="$MTAQ_PIDFILE";
;;
msp)
PIDFILE="$MSP_PIDFILE";
;;
*)
PIDFILE="$1";
;;
esac;
#
# If no pidfile, not running
# Extract pid/command and see if still running
# Remove pidfile if app didn't
# Also remove any control sockets
for PIDFILE in $PIDFILE $PIDFILE2; do
if [ -s $PIDFILE ]; then
PID=`head -n 1 $PIDFILE 2>/dev/null`;
COMMAND=`tail -n 1 $PIDFILE`;
if [ ! -z "`ps --no-heading $PID`" ]; then
result=0;
else
rm -f $PIDFILE;
case $who in
mta)
rm -f $MTAL_SOCKET $MTAL_CNTL;
;;
queue)
rm -f $MTAQ_SOCKET $MTAQ_CNTL;
;;
msp)
rm -f $MSP_SOCKET $MSP_CNTL;
esac;
fi;
fi;
done
return $result;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Check to see if running split service (MTA, MSP)
# Must be at 8.12.0+ for this support
#------------------------------------------------------------------------------
check_msp () {
local result;
result=1;
if [ ! -f /usr/share/sendmail/cf/feature/msp.m4 ]; then
result=1;
elif [ -s /etc/mail/submit.cf ] \
&& [ -s /etc/mail/submit.mc ]; then
if grep -qEe "^[[:space:]]*\`?FEATURE\([[:space:]]*\`?msp" \
/etc/mail/submit.mc; then
result=0;
fi;
fi;
return $result;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Miscellaneous sendmail command support for MSP/MTA split
# mailstats, mailq, runq
#------------------------------------------------------------------------------
newaliases () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
$MTA_COMMAND $MTA_A -bi $*;
};
hoststat () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
$MTA_COMMAND $MTA_A -bh $*;
};
purgestat () {
local parms;
parms=$(echo "$1" | tr '[:upper:]' '[:lower:]');
case $parms in
n*) # Now
parms='-O Timeout.hoststatus=1s';
shift;
;;
*)
parms='';
;;
esac;
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
$MTA_COMMAND $MTA_A -bH $parms $*;
};
mailstats () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
#if running split service, show the client status first
if check_msp; then
echo 'MSP statistics...';
#check if we have a status file for the MSP
statusfile=$(grep -Ee '^O StatusFile=/.*' \
/etc/mail/submit.cf | cut -d= -f2);
if [ -n $statusfile ]; then
/usr/lib/sm.bin/mailstats -C \
/etc/mail/submit.cf $* || true;
fi;
echo 'MTA statistics...';
fi;
#check if we have a status file for the MTA
statusfile=$(grep -Ee '^O StatusFile=/.*' \
/etc/mail/sendmail.cf | cut -d= -f2);
if [ -n $statusfile ]; then
/usr/lib/sm.bin/mailstats $* || true;
fi;
};
mailq () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
# if running split service, show the client queues first
if check_msp; then
echo 'MSP Queue status...';
#
# Check to see if shared memory is in use (8.12.0+)
if grep -qEe "^[[:space:]]*\`?define\(\`?confSHAREDMEMORYKEY'?[[:space:]]*,[[:space:]]*\`?0*[1-9]+[0-9]*'?[[:space:]]*\)" \
/etc/mail/submit.mc; then
$MSP_COMMAND -bP || true;
fi;
$MSP_COMMAND -bp $MSP_A $MISC_PARMS $* || true;
echo 'MTA Queue status...';
fi;
#
# Check to see if shared memory is in use (8.12.0+)
if grep -qEe "^[[:space:]]*\`?define\(\`?confSHAREDMEMORYKEY'?[[:space:]]*,[[:space:]]*\`?0*[1-9]+[0-9]*'?[[:space:]]*\)" \
/etc/mail/sendmail.mc; then
$MTA_COMMAND -bP || true;
fi;
$MTA_COMMAND -bp $MTA_A $MISC_PARMS $* || true;
};
runq () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
# if running split service, run the client queues first
if check_msp; then
echo 'Running the MSP queue...';
$MSP_COMMAND -q $MSP_A \
$MSP_L_QUEUE $MSP_PARMS $MISC_PARMS $* || true;
echo 'Running the MTA queues...';
fi;
if [ "$SPLIT_DAEMON" -eq 0 ]; then
$MTA_COMMAND -q $MTA_A \
$MTAL_L_RUNQ $QUEUE_PARMS $MISC_PARMS $* || true;
else
$MTA_COMMAND -q $MTA_A \
$MTAQ_L_RUNQ $QUEUE_PARMS $MISC_PARMS $* || true;
fi;
};
control () {
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
local parms;
parms="$*";
if [ -z "$parms" ]; then
parms='help';
fi;
if is_running mta; then
/usr/share/sendmail/smcontrol.pl $parms;
else
echo 'MTA: is not running';
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Print status of running job(s)
#------------------------------------------------------------------------------
status () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
# if running split service, check the client status first
if check_msp; then
if is_running msp; then
echo "MSP: $PID $COMMAND";
ps -fwp $PID;
if [ -S ${MSP_CNTL} ]; then
/usr/share/sendmail/smcontrol.pl \
-f ${MSP_CNTL} status || true;
fi;
elif [ $MSP_MODE = 'cron' ]; then
echo "MSP: is run via cron ($MSP_INTERVAL)";
elif [ $MSP_MODE = 'none' ]; then
echo 'MSP: is disabled';
else
echo 'MSP: is not running';
fi;
fi;
#
# Check MTA listener
if is_running mta; then
echo "MTA: $PID $COMMAND";
ps -fwp $PID;
if [ -S ${MTAL_CNTL} ]; then
/usr/share/sendmail/smcontrol.pl \
-f ${MTAL_CNTL} status || true;
fi;
elif [ $DAEMON_MODE = 'inetd' ]; then
echo 'MTA: is run via inetd';
elif [ $DAEMON_MODE = 'none' ]; then
echo 'MTA: is disabled';
else
echo 'MTA: is not running';
fi;
#
# Check for split daemon mode (separate listener/queue runner)
if is_running queue; then
echo "QUE: $PID $COMMAND";
ps -fwp $PID;
if [ -S ${MTAQ_CNTL} ]; then
/usr/share/sendmail/smcontrol.pl \
-f ${MTAQ_CNTL} status || true;
fi;
elif [ $QUEUE_MODE = 'cron' ]; then
echo "QUE: is run via cron ($QUEUE_INTERVAL)";
elif [ $QUEUE_MODE = 'none' ]; then
echo 'QUE: is disabled';
elif [ "$SPLIT_DAEMON" -eq 0 ]; then
echo "QUE: Same as MTA";
else
echo 'QUE: is not running';
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Cronjob handling
#------------------------------------------------------------------------------
cron_mta () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
# If cron not needed, don't do queue running (though it wouldn't hurt)
if [ $QUEUE_MODE = 'cron' ]; then
#
# If running a split (MTA/MSP) setup, we need to make sure that
# messages not immediately accepted by the MTA get delivered.
# Only run the MSP queue if MSP_MODE=none
if check_msp; then
if [ $MSP_MODE = 'none' ]; then
# Make sure only *ONE* cronjob at a time
if [ ! -f $STAMP_DIR/cron_msp ]; then
touch $STAMP_DIR/cron_msp;
#clean_queues /var/spool/mqueue-client;
$MSP_COMMAND -qf $MSP_A $MSP_L_QUEUE \
$MSP_PARMS $MISC_PARMS \
$CRON_PARMS || true;
rm -f $STAMP_DIR/cron_msp;
fi;
fi;
fi;
# Make sure only *ONE* cronjob at a time
if [ ! -f $STAMP_DIR/cron_mta ]; then
touch $STAMP_DIR/cron_mta;
$MTA_COMMAND -qf $MTA_A $MTAL_L_QUEUE \
$QUEUE_PARMS $MISC_PARMS $CRON_PARMS || true;
rm -f $STAMP_DIR/cron_mta;
fi;
fi;
};
cron_msp () {
#
# Make sure /var/run/sendmail/ exists
check_dirs;
#
# Obtain parameters IFF needed
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
#
# If cron not needed, don't do queue running (though it wouldn't hurt)
if [ $MSP_MODE = 'cron' ]; then
#
# If running a split (MTA/MSP) setup, we need to make sure that
# messages not immediately accepted by the MTA get delivered.
if check_msp; then
# Make sure only *ONE* cronjob at a time
if [ ! -f $STAMP_DIR/cron_msp ]; then
touch $STAMP_DIR/cron_msp;
#clean_queues /var/spool/mqueue-client;
$MSP_COMMAND -qf $MSP_A $MSP_L_QUEUE \
$MSP_PARMS $MISC_PARMS \
$CRON_PARMS || true;
rm -f $STAMP_DIR/cron_msp;
fi;
fi;
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Determine how to run sendmail mta daemon
# * No daemon
# * As listener
# * As queue runner
# * As both listener and queue runner
#------------------------------------------------------------------------------
daemon_check () {
local run_daemon;
#
# Skip daemon run for the following:
# * sendmail hasn't been configured
# * DAEMON_MODE = (none | inet) & QUEUE_MODE = (none | cron)
if [ ! -s /etc/mail/sendmail.cf ] || \
[ ! -s /etc/mail/sendmail.mc ]; then
echo 'sendmail has not been configured, not started.';
echo 'To configure sendmail, type sendmailconfig';
exit 1;
fi;
MTAR_PARMS="-C/etc/mail/sendmail-rx.cf $MTAR_L";
MTAL_PARMS="-C/etc/mail/sendmail-tx.cf $MTAL_L";
MTAQ_PARMS="$MTA_A $MTAQ_L";
run_daemon=3;
case "$DAEMON_MODE" in
none* | \
inetd*)
run_daemon=`expr $run_daemon - 1`;
;;
daemon* | \
*)
MTAL_PARMS="$MTAL_PARMS -bd $DAEMON_PARMS";
MTAR_PARMS="$MTAR_PARMS -bd $DAEMON_PARMS";
;;
esac;
case "$QUEUE_MODE" in
none* | \
cron*)
run_daemon=`expr $run_daemon - 1`;
;;
daemon* | \
*)
# Check for split daemon mode (separate listener/queue runner)
if [ $SPLIT_DAEMON -eq 0 ]; then
if [ ! -z "$QUEUE_INTERVAL" ]; then
MTAL_PARMS="$MTAL_PARMS -q${QUEUE_INTERVAL}";
MTAR_PARMS="$MTAR_PARMS -qp";
fi;
MTAL_PARMS="$MTAL_PARMS $QUEUE_PARMS";
MTAR_PARMS="$MTAR_PARMS $QUEUE_PARMS";
else
if [ ! -z "$QUEUE_INTERVAL" ]; then
MTAQ_PARMS="$MTAQ_PARMS -q${QUEUE_INTERVAL}";
fi;
MTAQ_PARMS="$MTAQ_PARMS $QUEUE_PARMS";
fi;
;;
esac;
# Add any miscellanous (ie debugging) parameters
MTAR_PARMS="$MTAR_PARMS $MISC_PARMS";
MTAL_PARMS="$MTAL_PARMS $MISC_PARMS";
MTAQ_PARMS="$MTAQ_PARMS $MISC_PARMS";
# Add PidFile override for MTA queue runner
MTAQ_PARMS="$MTAQ_PARMS -O PidFile=$MTAQ_PIDFILE";
MTAQ_PARMS="$MTAQ_PARMS -O ControlSocketName=$MTAQ_CNTL";
if [ $run_daemon -lt 2 ]; then
echo 'sendmail listen/queue daemon not desired.';
exit 0;
fi;
};
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# Clean sendmail queues (somewhat): does *not* support split qf/df/xf dirs.
# NOTE: This whole thing sucks with queue-groups, need to redo it!!!
# NOTE: Check for race conditions betwixt this code and queue-runners
#------------------------------------------------------------------------------
clean_queues () {
local QUEUE_ROOT QUEUE QUIET
# Obtain queue root directory
if [ -z "$1" ]; then
QUEUE_ROOT=/var/spool/mqueue
QUEUE=/var/spool/mqueue
QUIET=''
else
QUEUE_ROOT="$1"
QUEUE="$1"
QUIET='1'
fi
# remove lock files left because of kill/crash
# rm -f $QUEUE/[lnx]f* doesn't work with a plethora of files ;-(
for i in A B C D E F G H I J K L M N O P Q R S T U V W X Y Z \
a b c d e f g h i j k l m n o p q r s t u v w x y z; do
rm -f $QUEUE/[lnx]f${i}*
done
# remove zero length qf files
#for qffile in $QUEUE/qf*; do
for qffile in $(find $QUEUE_ROOT -type f -name 'qf*'); do
if [ -r "$qffile" ] && [ ! -s "$qffile" ]; then
if [ ! -z "$QUIET" ]; then
echo -n "<zero: $qffile> "; fi
rm -f "$qffile"
fi
done
# rename tf files to be qf if the qf does not exist
for tffile in $QUEUE/tf*; do
qffile=`echo "$tffile" | sed 's/\/tf\([[:alnum:]]*\)$/\/qf\1/'`
if [ -r "$tffile" ] && [ ! -f "$qffile" ]; then
if [ ! -z "$QUIET" ]; then
echo -n "<recovering: $tffile> "; fi
mv "$tffile" "$qffile"
elif [ -f "$tffile" ]; then
echo -n "<extra: $tffile> "
rm -f "$tffile"
fi
done
# remove df files with no corresponding qf files
for dffile in $QUEUE/df*; do
qffile=`echo "$dffile" | sed 's/\/df\([[:alnum:]]*\)$/\/qf\1/'`
Dffile=`echo "$dffile" | sed 's/\/df\([[:alnum:]]*\)$/\/Df\1/'`
if [ -r "$dffile" ] && [ ! -f "$qffile" ]; then
if [ ! -s "$dffile" ]; then
rm -f "$dffile"
else
if [ ! -z "$QUIET" ]; then
echo -n "<incomplete: $dffile> "; fi
mv "$dffile" "$Dffile";
fi
fi
done
# announce files that have been saved during disaster recovery
for xffile in $QUEUE/[A-Z]f*; do
if [ -f "$xffile" ]; then
if [ ! -z "$QUIET" ]; then
echo -n "<panic: $xffile> "; fi
fi
done
}
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
# check_dirs: Make sure /var/run/sendmail/{mta,msp,stampdir} exist
#------------------------------------------------------------------------------
check_dirs () {
if [ ! -d "${SENDMAIL_ROOT}" ]; then
mkdir -p "${SENDMAIL_ROOT}";
chown root:smmta "${SENDMAIL_ROOT}";
chmod 02755 "${SENDMAIL_ROOT}";
fi;
if [ ! -d "${MTA_ROOT}" ]; then
mkdir -p "${MTA_ROOT}";
chown $DAEMON_UID:smmta "${MTA_ROOT}";
chmod 02755 "${MTA_ROOT}";
fi;
if [ ! -d "${MSP_ROOT}" ]; then
mkdir -p "${MSP_ROOT}";
chown smmsp:smmsp "${MSP_ROOT}";
chmod 02775 "${MSP_ROOT}";
fi;
if [ ! -d "${STAMP_DIR}" ]; then
mkdir -p "${STAMP_DIR}";
chown root:smmsp "${STAMP_DIR}";
chmod 02775 "${STAMP_DIR}";
fi;
}
#------------------------------------------------------------------------------
# Why are we here ?
#------------------------------------------------------------------------------
# Some requisite initialization
if [ -z "$SM_Get_Parameters" ]; then
Get_Parameters;
fi;
if [ "$LOG_CMDS" = "Yes" ]; then
logger -i -p mail.debug -- "$0 $@";
fi;
#------------------------------------------------------------------------------
# Handle being called via an alias
#------------------------------------------------------------------------------
case $(basename $0) in
newaliases)
newaliases $*;
exit $?;
;;
hoststat)
hoststat $*;
exit $?;
;;
purgestat)
purgestat $*;
exit $?;
;;
mailstats)
mailstats $*;
exit $?;
;;
mailq)
mailq $*;
exit $?;
;;
runq)
runq $*;
exit $?;
;;
control|smcontrol)
control $*;
exit $?;
;;
status)
status $*
exit $?
;;
*)
;;
esac;
#------------------------------------------------------------------------------
# Handle being called via /etc/init.d/sendmail or directly
#------------------------------------------------------------------------------
# Ok, why are we here...
case "$1" in
#-----------------------------------------------------------------------
# Debian required/optional targets:
#-----------------------------------------------------------------------
start)
echo -n 'Starting Mail Transport Agent: sendmail';
start_sendmail;
echo '.'
;;
stop|force-stop)
echo -n 'Stopping Mail Transport Agent: sendmail';
stop_sendmail;
echo '.'
;;
restart)
echo -n 'Restarting Transport Agent: sendmail';
# reload is equivalent (but faster) than stop/start !
# but... it doesn't honor changes to /etc/mail/sendmail.conf
#reload_sendmail;
stop_sendmail;
start_sendmail;
echo '.';
;;
restart-if-running)
if ! is_running mta && ! is_running msp; then
echo 'Mail Transport Agent: sendmail is not running';
else
$0 restart;
fi;
;;
reload-if-running)
if ! is_running mta && ! is_running msp; then
echo 'Mail Transport Agent: sendmail is not running';
else
$0 reload;
fi;
;;
reload|force-reload)
echo -n 'Reloading Mail Transport Agent configuration: sendmail';
reload_sendmail;
echo '.';
;;
#-----------------------------------------------------------------------
# Local targets (sendmail commands/aliases) for MSP/MTA split support
# These targets will pass along any provided parameters
#-----------------------------------------------------------------------
newaliases)
shift;
newaliases $*;
;;
hoststat)
shift;
hoststat $*;
;;
purgestat)
shift;
purgestat $*;
;;
mailstats)
shift;
mailstats $*;
;;
mailq)
shift;
mailq $*;
;;
runq)
shift;
runq $*;
;;
control|smcontrol)
shift;
control $*;
;;
#-----------------------------------------------------------------------
# Local targets for extended support/debugging
#-----------------------------------------------------------------------
status)
shift;
status $*;
;;
debug)
#
# If not running, can't debug
if is_running msp; then
echo -n 'Dumping MSP state...';
$SIGNAL_MSP_CMD --signal USR1;
echo 'done.';
fi;
if is_running mta; then
echo -n 'Dumping MTA state...';
$SIGNAL_MTAL_CMD --signal USR1;
echo 'done.';
fi;
;;
clean|clean_que*|clean-que*)
#
# If running, don't clean the queues...
if is_running mta; then
echo 'MTA is running, queue cleaning ill advised...';
else
echo -n 'Cleaning up the queues...';
clean_queues;
echo 'done.';
fi;
;;
#-----------------------------------------------------------------------
# Local targets for cronjob support
#-----------------------------------------------------------------------
cron-msp)
cron_msp;
;;
cron-mta)
cron_mta;
;;
#-----------------------------------------------------------------------
# Default target - bitch and moan
#-----------------------------------------------------------------------
*)
echo "Invalid command <$1>";
echo "Usage: $0 <command>";
echo ' Where <command> is one of the following';
echo ' start|stop|restart|restart-if-running';
echo ' reload-if-running|reload|force-reload';
echo ' newaliases|hoststat|purgestat|mailstats|mailq|runq|control';
echo ' status|debug|clean';
exit 1;
;;
esac;
exit 0;
Scalix Installation
Installieren ===
cd /usr/src/scalix-debian-11.0.4-GA/software/scalix-server
dpkg -i ../../third_party/libical/i386/libical*.deb
dpkg -i scalix-server_*.deb
export PATH=/opt/scalix/bin:$PATH
echo -n "What should the name of your primary mailnode be? "; read mnode
ldomain=$(hostname -d)
host=$(hostname)
fqdn=$(hostname -f)
short=${host:0:1}${host: -1:1}
# Initialize the Scalix Message Store
ommakeom
# Set Generation Rules for Display Name, Login Name and Internet Address
sxconfig --set -t general.usrl_cn_rule='S, G'
sxconfig --set -t general.usrl_authid_rule='gs@'
sxconfig --set -t orniasys.name_part_1='"C" <G.S>' -t orniasys.domain_part_1=$ldomain
# Creating the Default Mailnode
omaddmn -m $mnode
# Starting the Server Daemons
omrc -n
# Creating the Default Admin User
echo -n "Please enter the admin password for the Scalix admin user (sxadmin)? "; read admpwd
omaddu -n sxadmin/$mnode --class limited -c admin -p "$admpwd" sxadmin
# Configuring the Admin User
omconfenu -n "sxadmin/$mnode"
omlimit -u "sxadmin/$mnode" -o -i 0 -m 0
# Creating the LDAP Query User
echo -n "Please enter a password for the ldap query user? "; read ldappwd
omaddu -n sxqueryadmin/$mnode --class limited -c admin -p $ldappwd sxqueryadmin@$fqdn
# Creating the Standard Scalix Admin Groups
omaddpdl -l ScalixUserAdmins/$mnode
omaddpdl -l ScalixUserAttributesAdmins/$mnode
omaddpdl -l ScalixGroupAdmins/$mnode
omaddpdl -l ScalixAdmins/$mnode
cat >>/var/opt/scalix/${short}/s/sys/general.cfg <<EOF
#
# The CDA service (used for "type down" in some clients) is more
# efficient if it can check the directory change log before attempting
# to update the access tables that it uses. One slow machines, it may
# also be worth uncommenting the CDA_CHECKTIME tweak to reduce the check
# interval from five minutes to an hour.
#
CDA_USE_CHANGE_LOG=TRUE
# CDA_CHECKTIME=60
#
# These tweaks limit the number and rate of IMAP connections to the
# server. The IMAP_CONNECTION_LIMIT simply restricts the total number of
# connections to the server. Note that many IMAP clients have several
# connections for each IMAP session. The IMAP_CONNRATE_LIMIT restricts
# the rate at which clients can connect to the server, in this case, at
# most 10 connections per second. If clients try to connect faster
# than that, the IMAP server simply slows down the rate at which it will
# accept new connections.
#
IMAP_CONNECTION_LIMIT=500
IMAP_CONNRATE_LIMIT=10
#
# The IMAP_IDLE_TIMEOUT tweak is the maximum time an IMAP connection
# will wait for a command before terminating the connection. The default
# setting, and the minimum required setting, is 30 minutes. Some
# clients "refresh" their connection once every thirty minutes
# exactly -- but if they are a little bit late, the server drops their
# connection. Setting a timeout of 31 minutes avoids this problem.
#
IMAP_IDLE_TIMEOUT=31
#
# This tweak arranges for Local Delivery to automatically create a
# message store for users created without one.
# Users added with the bulk-add mechanism used by the
# wizard do not have a message store. So setting this tweak allows
# them to receive mail before they are initially signed on.
#
LD_CREATE_MESSAGE_STORE=TRUE
#
# These three tweaks allow users to sign on using an alias. Only
# system-defined aliases are permitted and it the alias name is ignored
# for the purposes of message creation and so on.
#
# Note that changing these settings normally requires restarting Scalix.
#
UAL_SIGNON_ALIAS=YES
UAL_SIGNON_ALIAS_CONFIG=SYS
UAL_USE_SIGNON_ALIAS=FALSE
EOF
# Starting Scalix Services
omon -s all
# Installing the Scalix Server package
# ein Deb-Paket (scalix-tomcat_*.deb) hat einen Fehler im Install-Skript.
# Der muss zuerst behoben werden (Deb auspacken, Syntax Error korrigieren, Deb-Paket neu erstellen)
dpkg -i scalix-postgres_*.deb scalix-tomcat-connector_*.deb scalix-tomcat_*.deb \
scalix-mobile_*.deb scalix-platform_*.deb scalix-res_*.deb scalix-sac_*.deb \
scalix-sis_*.deb scalix-swa_*.deb
# Setup DB
/opt/scalix-postgres/bin/sxpsql-init # To create the database and tables
echo -n "Please enter a password for the db user? "; read dbpwd
/opt/scalix-postgres/bin/sxpsql-setpwd $dbpwd
echo -n "Please enter the external ip address of your Scalix box? "; read ip
/opt/scalix-postgres/bin/sxpsql-whitelist 127.0.0.1 $ip
# Setting up Scalix-Tomcat
vi /etc/opt/scalix-tomcat/scalix-tomcat.conf
# Set RAM Usage to 50% of complete RAM (or other, e.g. 40M)
# JAVA_OPTS="-server -Xms40m -Xmx40m"
# Configure Scalix
tomcatport=80
base=/var/opt/scalix/${short}
files="$base/webmail/swa.properties \
$base/caa/scalix.res/config/ubermanager.properties \
$base/res/config/res.properties \
$base/platform/platform.properties \
$base/mobile/mobile.properties \
$base/sis/sis.properties"
for file in $files; do
sed -e "s;%LOCALDOMAIN%;$ldomain;g" \
-e "s;%LOCALHOST%;$fqdn;g" \
-e "s;%PLATFORMURL%;$fqdn;g" \
-e "s;__SECURED_MODE__;false;g" \
-e "s;ubermanager/__FQHN_HOST__@__KERBEROS_REALM__;;g" \
-e "s;__KERBEROS_REALM__;;g" \
-e "s;__FQHN_FOR_KDC_HOST__;;g" \
-e "s;__FQHN_QUERY_SERVER_NAME__;$fqdn;g" \
-e "s;__UBERMGR_USE_EXTERNAL_AUTH__;false;g" \
-e "s;__UBERMGR_ALLOW_EXTERNAL_AUTH__;false;g" \
-e "s;__UBERMGR_MAXLIST_SIZE__;100;g" \
-e "s;__UBERMGR_MAIL_DOMAINS_LIST__;$ldomain;g" \
-e "s;__UBERMGR_EXTERNAL_DOMAIN_AUTH_LIST__;;g" \
-e "s;__CONFIGURED__;true;g" \
-e "s;__FQHN_FOR_UBERMANAGER__;$fqdn;g" \
-e "s;__TOMCAT_PORT__;$tomcatport;g" \
-e "s;localhost;$fqdn;g" \
-e "s;%SIS-LANGUAGE%;German;g" \
-e "s;%INDEX-WHITELIST%;$fqdn;g" \
-e "s;%SEARCH-WHITELIST%;$fqdn;g" \
$file > $file.neu
mv $file.neu $file
done
# Write Ldappassword to psdata
cd ${base}/caa/scalix.res/config
echo "$ldappwd" > psdata
chown root:root psdata
chmod 400 psdata
cd
# Restart Tomcat
/etc/init.d/scalix-tomcat restart
# Setup Apache
ln -s /opt/scalix/global/httpd/scalix-web-client.conf /etc/apache2/conf.d
cat << EOF > /etc/apache2/conf.d/scalix-access.conf
<Location />
Allow from all
</Location>
EOF
/etc/init.d/apache2 restart
cat << EOT
#####################################################
# You should now be able to access scalix at:
# http://$fqdn/sac
# http://$fqdn/webmail
#####################################################
EOT
Jetzt sollte man sich in o.g. URL als sxadmin und dem vorher definierten Password einloggen können. Als sxadmin kann man in der AdminConsole (SAC) neue User anlegen.
Quellen
[1] Scalix Wiki: Manuelle Installation unter Etch
[2] Linux Magazin Online: Mail Server