XEN PVUSB

PVUSB mit XEN 3.4

Bei mir gab es Probleme mit USB per PCI-Delegation unter XEN 3.4.1 auf Lenny (die Netzwerkkarten gingen, lsusb hat auch die USB Hostcontroller angezeigt, aber es wurden keine USB-Devices sichtbar), deshalb habe ich die seit Xen 3.4 neue USB-Virtualisierung PVUSB (paravirtualized USB support for Xen, Details siehe hier) getestet und unter Lenny eingebaut. Dabei ist folgendes Skript herausgekommen, welches ich in '/etc/rc.local' als pvusb -b aufrufe, um beim booten des Host-Systems den USB-Drucker an meine Printer-Domain durchzureichen.

Beispiele PVUSB Konfigfile zum automatischen Verbinden von USB-Devices z.B. beim booten des XEN Hostsystems. Ich verbinde meinen USB-Drucker nach dem Start mit meinen CUPS Printserver (srv), und USB-Sticks z.B. mit dem Webserver in der DMZ (dmz).

File /etc/xen/pvusb.conf

# Configfile for pvusb
# Device_Id Domain Comment
04a9:1093 srv Canon IP4000
13fe:1d00 srv Sun USB-Stick 1GB
090c:1000 dmz Novell USB-Stick 2GB

File /etc/rc.local

#!/bin/sh
...
pvusb -b
...

Beispiele für pvusb

m450:~# pvusb -h
usage:  pvusb -b
        pvusb -d device_id -s domain [-c comment] -w
        pvusb -u usb-port  -s domain [-c comment] -w
    ------------
    -b            # boot host with static defined PVUSB rules
    -s domain     # server domainname or -id
    -u usb-port   # USB-PORT e.g. "3-2"
    -d device_id  # USB device_id e.g. "0912:1234"
    -c comment    # e.g. "Canon IP4000"
    -l            # list (default) actual PVUSB Devices
    -q            # don't list PVUSB Devices
    -r            # list PVUSB rules
    -w            # write/activate PVUSB rule
    -x            # delete PVUSB rule

m450:~# pvusb -l
PVUSB: 3-2 on srv (3) 04a9:1093 Canon, Inc. PIXMA iP4000

m450:~# pvusb -r
5-1:5:0:2
3-2:3:0:3
5-2:3:0:2

m450:~# pvusb -x 5-2:3:0:2

m450:~# pvusb -r
5-1:5:0:2
3-2:3:0:3

File /usr/local/sbin/pvusb

#!/bin/sh
#
# paravirtualized USB Support
#
# Version: $Revision$
# Datum:   $Date$
#
# Author:  neobiker
#
# $Log$

set -e
#set -x

[ -x /usr/bin/lsusb ] || {
  echo "Error: Missing /usr/bin/lsusb, please install usbutils";
  exit 1; }

usage ()
{
  cat <<-EOT
        usage:  $(basename $0) -b
                $(basename $0) -d device_id -s domain [-c comment] -w
                $(basename $0) -u usb-port  -s domain [-c comment] -w
    ------------
    -b            # boot host with static defined PVUSB rules
    -s domain     # server domainname or -id
    -u usb-port   # USB-PORT e.g. "3-2"
    -d device_id  # USB device_id e.g. "0912:1234"
    -c comment    # e.g. "Canon IP4000"
    -l            # list (default) actual PVUSB Devices
    -q            # don't list PVUSB Devices
    -r            # list PVUSB rules
    -w            # write/activate PVUSB rule
    -x            # delete PVUSB rule
EOT
}

init ()
{
    VUSB_ID=0
    LIST_PVUSB=0
    CONFIG=/etc/xen/pvusb.conf

    [ -e $CONFIG ] || cat >$CONFIG <<EOT
# Configfile for pvusb
# Device_Id  Domain Comment
# 01234:5678 server USB-Printer
EOT
}

#
# paravirtualized USB Support
# ---------------------------

pvusb_init_xenstore ()
{
    # Setup and initialize the XenStore for PVUSB
    # based on init_xs.sh by Noboru Iwamatsu

    FRONT_ID=$(xm domid "$1")   # use domain id if dommane given
    DEV_ID=$2                   # vusb_bus typical 0

    DEV_NAME=vusb       # fix name
    NUM_PORTS=8         # Max 16 ports.

    XSWRITE=/usr/bin/xenstore-write
    XSCHMOD=/usr/bin/xenstore-chmod

    # Write backend information into the location that frontend look for.
    $XSWRITE /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/backend-id 0
    $XSWRITE /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/backend \
            /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID

    # Write frontend information into the location that backend look for.
    $XSWRITE /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/frontend-id $FRONT_ID
    $XSWRITE /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/frontend \
            /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID

    # Write virtual root hub field.
    $XSWRITE /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/num-ports $NUM_PORTS
    for i in $(seq 1 $NUM_PORTS)
    do
        # Set all port to disconnected state
        $XSWRITE /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/port-$i "0"
    done

    # Set permission
    $XSCHMOD /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID n$FRONT_ID r0
    $XSCHMOD /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/backend-id n$FRONT_ID r0
    $XSCHMOD /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/backend n$FRONT_ID r0
    $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID n0 r$FRONT_ID
    $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/frontend-id n0 r$FRONT_ID
    $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/frontend n0 r$FRONT_ID
    $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/num-ports n0 r$FRONT_ID
    for i in $(seq 1 $NUM_PORTS)
    do
        $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/port-$i n0 r$FRONT_ID
    done

    # Set state to XenbusStateInitialising
    $XSWRITE /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/state 1
    $XSCHMOD /local/domain/$FRONT_ID/device/$DEV_NAME/$DEV_ID/state n$FRONT_ID r0
    $XSWRITE /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/state 1
    $XSCHMOD /local/domain/0/backend/$DEV_NAME/$FRONT_ID/$DEV_ID/state n0 r$FRONT_ID
}

pvusb_init ()
{
    [ "$VUSB_ID" ] || return
    VUSB_ID=1

    # 1) First, you have to start from the state that no device is connected.
    #    remove all usb modules but usbbk
    usb_mods="$(lsmod | grep usb | grep -v usbcore | grep -v usbbk | awk '/^usb/ {print $1}')"
    [ -n "$usb_mods" ] && rmmod $usb_mods

    # stop udevd fetching events before the backend driver
    udevadm control --stop_exec_queue

    # load usb (backend) modules
    modprobe usbbk
}

pvusb_setup ()
{
    # connect USB devices to backend (and restart udevd afterwards)
    # XXX: better way to connect USB devices dynamically without udevd?
    rmmod uhci_hcd ehci_hcd
    modprobe -a uhci_hcd ehci_hcd

    # start udevd again after we have finished
    udevadm control --start_exec_queue
}

pvusb_port ()
{
    dom_id=$1           # domain to connect PVUSB Port
    usb_bus=$2          # where is usb device connected
    comment=$3          # a name for usb device
    vusb_bus=0          # virtual USB Bus in domain (we use always usb bus 0)
    ((++VUSB_ID))

    if [ -z "$dom_id" ]; then
        echo "missing option -s <dom_id>"
        return
    fi
    if [ -z "$usb_bus" ]; then
        echo "missing option -u <usb_port>"
        return
    fi
    [ "$dom_id" -gt 0 ] || dom_id=$(xm domid $dom_id)

    # initialise paravirtualized USB Support in domain with pv-usb bus 0
    pvusb_init_xenstore $dom_id $vusb_bus

    # 2) test and remove existing hotplug-rule
    actual_vport=$(cat /sys/bus/usb/drivers/usbback/vports | awk "/$usb_bus/"'{print}')
    [ -n "$actual_vport" ] && echo "$actual_vport" > /sys/bus/usb/drivers/usbback/remove_vport

    # 2) Write the hotplug-rule through the sysfs interface of the backenend driver
    echo "$usb_bus:$dom_id:$vusb_bus:$VUSB_ID" > /sys/bus/usb/drivers/usbback/new_vport

    # tell me what happened
    actual_vport=$(cat /sys/bus/usb/drivers/usbback/vports | awk "/$usb_bus/"'{print}')
    echo "xen PVUSB Rule written: $actual_vport $comment on domain $DOM_NAME ($dom_id)"
}

get_usb_port ()
{
    usb_dev="$1"
    usb_port=""

    # find out where USB-Device is connected
    usb_ports="$(/bin/ls -1 /sys/bus/usb/devices/ | awk '/^[0-9]\-[0-9]$/ {print}')"
    usb_bus=$(lsusb | grep $usb_dev | awk '{printf "%d",$2}')
    usb_adr=$(lsusb | grep $usb_dev | awk '{printf "%d",$4}')

    for port in $(echo "$usb_ports"|grep "$usb_bus"); do
        adr=$(cat /sys/bus/usb/devices/$port/devnum)
        if [ "$adr" = "$usb_adr" ]; then
            usb_port=$port
            break
        fi
    done
    echo "$usb_port"
}

pvusb_write_connected_devices_static ()
{
    # Define where to connect my USB-Devices (static definitions)
    # -----------------------------------------------------------
    #    see dmesg (syslog) where device ist connected:
    #    e.g.: usb 3-2: new full speed USB device using uhci_hcd and address 4

    devices="$1"
    usb_ports="$(/bin/ls -1 /sys/bus/usb/devices/ | awk '/^[0-9]\-[0-9]$/ {print}')"

    for usb_dev in $devices; do

        # where to connect my usb devices to?
        # list static definitions from $CONFIG

        pvusb_conf=$(grep "$usb_dev" $CONFIG)
        if [ -n "$pvusb_conf" ]; then
            server=$(echo $pvusb_conf | awk '{print $2}')
            comment=$(echo $pvusb_conf | cut -d\  -f3-)
        else
            continue
        fi

        # find out where USB-Device is connected
        usb_bus=$(lsusb | grep $usb_dev | awk '{printf "%d",$2}')
        usb_adr=$(lsusb | grep $usb_dev | awk '{printf "%d",$4}')
        for port in $(echo "$usb_ports"|grep "$usb_bus"); do
            adr=$(cat /sys/bus/usb/devices/$port/devnum)
            if [ "$adr" = "$usb_adr" ]; then
                usb_port=$port
                break
            fi
        done
        echo "found $comment ($usb_dev) on USB-Port $usb_port"

        # PVUSB write xen backend rules for usb device
        # --------------------------------------------
        pvusb_port $domain $usb_port "$comment"

        # remember domain to be triggered
        PVUSB_DOMAINS=$(cat <<-EOT | sort -u
                $PVUSB_DOMAINS
                $domain)
    done
}

pvusb_boot_host ()
{
    # get all connected USB devices
    usb_devices=$(lsusb | grep -v '0000:0000' | awk '{print $6}')

    # ready if no devices are found
    if [ -z "$usb_devices" ]; then
        echo "$(basename $0): No USB Devices found"
        return
    fi

    # PVUSB initialising / prerequisits
    # ------------------
    pvusb_init

    # PVUSB write backend rules
    # -------------------------
    pvusb_write_connected_devices_static "$usb_devices"
}

pvusb_trigger ()
{
    # PVUSB trigger for all relevant domains
    # --------------------------------------
    [ -n "$PVUSB" ] || return

    # tell PV domain to reload USB
    # XXX: better way to trigger domU?
    for server in $(echo "$1" | sort -u); do
        ssh $server "[ -n \"\$(lsusb|grep -v '0000:0000')\" ] || exit 0 ;
                     rmmod xen_hcd usbcore ;
                     modprobe xen_hcd
                    "
    done
}

pvusb_list ()
{
    # tell me what happened
    # ---------------------
    pvusb_grabbed="$(cat /sys/bus/usb/drivers/usbback/grabbed_devices)"
    for pvusb in $pvusb_grabbed; do
        usb_port=$(echo $pvusb| awk -F: '{print $1}')
        domain=$(cat /sys/bus/usb/drivers/usbback/vports | awk -F: "/$usb_port/"' {print $2}')
        dev_id="$(cat /sys/bus/usb/devices/$usb_port/idVendor)"
        dev_id="$dev_id:$(cat /sys/bus/usb/devices/$usb_port/idProduct)"
        product=$(lsusb | grep $dev_id | cut -d\  -f6-)
        echo "PVUSB: $usb_port on `xm domname $domain` ($domain) $product"
    done
}

# ------------------------
# Script starts here
# ------------------------
init

while getopts ":bc:d:hlqrs:u:wx:" opt; do
  case $opt in
    b) # boot host with static defined rules
      pvusb_boot_host
      pvusb_setup
      pvusb_trigger $PVUSB_DOMAINS
      sleep 1
      LIST_PVUSB=1
      ;;
    c) # comment  e.g. Canon IP4000
      comment=$OPTARG
      ;;
    d) # USB DEVICE_ID (0912:1234)
      usb_port=$(get_usb_port $OPTARG)
      ;;
    h) usage
      ;;
    l) # list PVUSB Ports
      LIST_PVUSB=1
      ;;
    q) # don't list PVUSB Ports
      LIST_PVUSB=0
      ;;
    r) # list rules
      cat /sys/bus/usb/drivers/usbback/vports
      ;;
    s) # Server Domain name od id
      domain=$OPTARG
      ;;
    u) # USB-PORT (3-2)
      usb_port=$OPTARG
      ;;
    w) # write rule PVUSB
      pvusb_init
      pvusb_port $domain $usb_port "$comment"
      pvusb_setup
      pvusb_trigger $PVUSB_DOMAINS
      LIST_PVUSB=1
      ;;
    x) # delete PVUSB rule
      echo "$OPTARG" > /sys/bus/usb/drivers/usbback/remove_vport || true
      ;;
    \?)
      echo "Invalid option: -$OPTARG" >&2
      ;;
  esac
done

[ $LIST_PVUSB -gt 0 ] && pvusb_list